Rigs

Rig #1

1200 S Main Andrews, Texas 79714
Rig #1 Purchased 2/8/21
Rig: Red Mesa Rig #1
Equipment: 2009 Service King Series 500 Pulling Unit
Rig #1 was Red Mesa Energy Services' first pulling unit purchase.
The rig has worked for several customers and with several crews over the years.
After hiring a long-time crew from Formentera, Rig #1 found a permanent home.
Rig #1 now works every day for Formentera
Rig #1 does not have a current Cat IV inspection but does have a current Cat III inspection.

Rig Photographs

Rig #2

1200 S Main Andrews, Texas 79714
Red Mesa Rig #2 purchased 2/22/22
Red Mesa Rig #2 is a 2008 Taylor Series C500 Pulling Unit.
Rig #2 successfully completed its Cat IV inspection on June 24, 2024.
Rig #2 worked for Crescent Energy for four years and previously supported Contango, FDL Operating, and Sheridan Oil & Gas.
Following Crescent Energy's acquisition of Contango and subsequent reductions in activity, Rig #2 became Red Mesa Energy Services' floater rig.
The rig currently supports Reverence Operating approximately two weeks each month and provides additional coverage for independent operators as needed.
The same operator and crew have remained with Rig #2 since Red Mesa purchased the rig

Rig Photographs

Rig #3

1200 S Main Andrews, Texas 79714
Red Mesa Rig #3 purchased 2/22/22
Red Mesa Rig #3 is a 2006 Taylor C500 Series Pulling Unit.
This rig does not currently have a Cat IV inspection. A Cat III inspection was completed in 2025.
Rig #3 covers all monthly well pulls for Vin Fisher Operating.
Occasionally, Rig #3 is shared with independent oil producers when approved by Vin Fisher Operating, with the understanding that the rig is returned immediately upon completion of the work.
This rig continues to operate with the original crew that was hired when Red Mesa purchased the unit.

Rig Photographs

Rig #4

1200 S Main Andrews, Texas 79714
Rig #4 Purchased 8/24/22
Rig: Red Mesa Rig #4
Equipment: 2007 Crown Series 500 Pulling Unit
Rig works every day for Crescent Energy.
Previously operated for Contango Operating, FDL Operating, and Sheridan Oil & Gas.
Cat IV inspection completed November 15, 2019.
The same crew has operated the rig since the purchase date.

Rig Photographs

Rig #5

1200 S Main • Andrews, Texas 79714
Red Mesa Rig #5 Purchased 7/14/23
Red Mesa Rig #5 is a 2009 Taylor Series 500 pulling unit
Rig #5 was purchased in July 2023.
Rig #5 does not currently have a Cat IV inspection but has a current Cat III inspection completed in 2025.
Since being purchased, the rig has worked for several operating companies.
Red Mesa hired a crew that had worked together for Citation Oil & Gas for more than six years.
The crew is currently one of the most trusted crews working for Citation and routinely covers remote lease locations that receive limited supervision.
The crew spends a significant amount of time working out of town and receives daily per diem compensation.

Rig Photographs

Rig #6

1200 S Main Andrews, Texas 79714
Red Mesa Rig #6 purchased 4/1/25
Red Mesa Rig #6 is a 1982 Skytop Brewster 500 Series Pulling Unit.
Prior to purchase, the rig had been refabricated and outfitted with a new engine and transmission
Rig #6 completed a Cat IV inspection on July 20, 2024, and a Cat III inspection on December 17, 2025.
Red Mesa purchased Rig #6 and retained the same crew that was operating the unit.
Rig #6 currently works every day for Crescent Energy and previously operated for Contango Operating.
The rig continues to provide dependable daily service for Crescent Energy operations

Rig Photographs

Rig #7

1200 S Main | Andrews, Texas 79714
RED MESA RIG #7 purchased 4/10/26
2018 Crane Carrier Company (CCC) 500 Series Pulling Unit
Red Mesa Rig #7 is a 2018 Crane Carrier Company (CCC) 500 Series Pulling Unit
The crew hired with Rig #7 had worked for the previous owner, XTO Operating, for more than three years and continues to operate the rig for Hilcorp.
Rig #7 was purchased in May 2026 and works every day for Hilcorp.
The rig is supported by a full-time reverse unit operator and a complete reverse unit package.
Rig #7 has a Cat IV inspection completed on January 7, 2019, and a current Cat III inspection.
The rig successfully passed an extensive inspection required by Hilcorp safety personnel in accordance with New Mexico OSHA standards.

Rig Photographs

Rig #8

1200 S Main Andrews, Texas 79714
Red Mesa Rig #8 purchased 6/1/26
Red Mesa Rig #8 is a 2014 Rig Works Mustang rig.
The rig was purchased in May 2026 and immediately went to work for Mach Energy, formerly Sabinal Operating.
The crew was hired from a previous rig company and has been working for Mach Energy and Sabinal Operating for the past three years.
Rig #8 has a Cat IV inspection completed on February 7, 2019, and a current Cat III inspection completed on the purchase date.
Rig #8 will be swapped with Red Mesa Rig #9 and moved to Hilcorp by July 25, 2026, due to the required Cat IV inspection.

Rig Photographs

Rig #9

1200 S Main Andrews, Texas 79714
Red Mesa Rig #9 purchased 7/3/26
Rig #9 is a 2006 Service King Series 500 pulling unit and is Red Mesa Energy Services' latest rig purchase, acquired in July 2026.
Rig #9 does not currently have a Cat IV inspection; however, the rig has a current Cat III inspection.
Rig #9 is scheduled to replace Rig #8 at Hilcorp and will cover operations currently assigned to Mach Energy
Red Mesa has already hired a crew that is prepared to begin operations once the rig passes inspection and officially replaces Rig #8 at Hilcorp.

Rig Photographs

BOP & Fishing Rental Department

Red Mesa Energy Services maintains a full BOP and Fishing Rental Department to support
workover and completion operations throughout the Permian Basin. The department
includes BOP control packages, wellhead and pressure-control equipment, fishing tools,
wash pipe inventory, specialty equipment, and a complete rental inventory